Autoclaves for CSSDs OR and Medical Centers
Designed to comply with the European EN285 standard with chambers designed for StU (Sterilization Unit) load volumes (12 to 15 StU chamber volume). The autoclave sterilizers are designed and manufactured in a state-of-the-art facility in compliance with strict international standards to ensure safe re-use of sterilized equipment. Also builds customized autoclave configurations to adapt to a customer’s site layout. All models are available with either single or double doors.
Large capacity autoclaves operate with saturated steam as the sterilizing agent with a temperature range of 105 °C (221°F) to 138 °C (280 °F) and a working chamber pressure that meets AMSE and PED requirements.
Features
Safety
Technical Specifications
Custom Design for Limited Space
Strong engineering capability allows for highly customized autoclave design. Facilities with space layout limitations will benefit from custom narrow design autoclaves which provide high capacity in a limited space. Narrow design autoclaves allow for more autoclaves in a given space to ensure continued sterile processing in case of autoclave downtime.
Uniform Heat Distribution
Fully jacketed chambers ensure uniform heat distribution to ensure consistent sterilization conditions for all loads in chamber. A chamber that is not fully jacketed may have cool spots which can cause improper sterilization.
Green Water Saving
The optional EcoWater Radiator and EcoWater Chiller water saving systems are the best solutions to minimize water consumption between 50% and 90%.
Perfectly Optimized Cycles
With years of research and customer feedback we have fine-tuned our formula for perfectly optimized cycles with the precise combination of pulses, timing, temperature control, speed and drying.
Stainless Steel Piping
Stainless steel piping and connectors are used to avoid corrosion which is necessary to safeguard the integrity of the autoclave and prevent contamination of the sterilized loads (either as chemical or particulate contamination).
Load Traceability
The optional R.PC.R software allows for tracing sterilized loads by barcode. All cycle records and associated barcodes are automatically recorded to a PC on your network. In additional, R.PC.R allows for convenient access to cycle reports, including graphs and tables.